Part Number Hot Search : 
MJW16110 CPC1330 1N4295A 74HC154N DZ10B 1345T STG512 1D850
Product Description
Full Text Search
 

To Download LP133X7-A2 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 1 11 1/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. specification for approval ( ) preliminary specification ( ) final specification title 13.3 xga tft lcd buyer supplier lg lcd inc. model model LP133X7-A2 signature / date approved by s.h.kang / g.manager date / reviewed by s.c.yoon / manager b.h.koo / manager / prepared by h.s.song / engineer h.j.kim / engineer please return 1 copy for your confirmation with your signature and comments. product engineering dept. lg lcd inc. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 2 22 2/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. contents no. item page - cover 1 - contents 2 - record of revision 3 1 general description 4 2 maximum ratings 5 3 electrical specifications 6 3-1 electrical characteristics 6 3-2 interface connection 7 3-3 signal timing specifications 9 3-4 signal timing wave forms 10 3-5 color input data reference 11 3-6 power sequence 12 3-7 vcc dip condition 13 4 optical specifications 14 5 mechanical characteristics 15 6 reliability 18 7 international standards 19 7-1 safety 19 7-2 emc 19 8 packing 20 8-1 designation of lot mark 20 8-2 packing form 20 9 precautions 21 appendix a-1 optical characteristic measurement equipment and me thod 23 a-2 luminance 23 a-3 response time 23 a-4 viewing angle 24 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 3 33 3/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. records of revisions version no date page description 1.0 jun. 7, 1999 - first draft www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 4 44 4/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 1. general description the LP133X7-A2 is a color active matrix liquid crys tal display with an integral cold cathode fluoresce nt tube(ccft) back light system. the matrix employs a -si thin film transistor as the active element. it is a transmissive type display operating in the normally white mode. this tft-lcd has a 13.3 inch diagonal ly measured active display area with xga resolution(76 8 vertical by 1024 horizontal pixel array). each p ixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scal e or the brightness of the sub-pixel color is determined wit h a 6-bit gray scale signal for each dot, thus, pre senting a palette of more than 262,144 colors. the LP133X7-A2 has been designed to apply the int erface method that enables low power, high speed lo w emi. flat link must be used as a lvds(low voltage d ifferential signaling) chip. the LP133X7-A2 is intended to support application s where thin thickness, low power are critical fact ors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, th e LP133X7-A2 characteristics provide an excellent fla t panel display for office automation products such as notebook pc. general features the following are general feature of the model lp13 3x7-a2 lcd; active screen size 13.3 inches(33.78c m) diagonal outline dimensions 284(h) 214.5(v) 5.5(d) mm (typ) pixel pitch 0.264 mm 0.264 mm pixel format 1024 horiz. by 768 vert. pixels rgb stripe arrangeme nt color depth 6-bit, 262,144 col ors luminance,white 130 cd/m 2 (typ) power consumption total 4.2watt(typ) weight 480g (typ) display operating mode transmissive mode, normally white surface treatments hard coating(3h), anti-glare treatment of the front polarizer column driver circuit row driver circuit tft-lcd (1024 768) timing control block power block flatlink interface backlight assy cn1 cn 2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 5 55 5/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 2. maximum ratings the following are maximum values which, if exceeded , may cause faulty operation or damage to the unit. table 1 absolute maximum ratings values parameter symbol min. max. units notes power input voltage operating temperature storage temperature v cc t op t st -0.3 0 -20 +3.6 +50 +60 vdc at 25 1 1 note: 1. temperature and relative humidity range a re shown in the figure below. 3. electrical specifications relative humidity (% rh) temperature 100 90 operating range storage range 80 60 40 20 5 80 60 40 20 -20 -40 0 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 6 66 6/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 3-1. electrical characteristics the LP133X7-A2 requires two power inputs. one is e mployed to power the lcd electronics and to drive t he tft array and liquid crystal. the second input whic h powers the ccfl, is typically generated by an inv erter. the inverter is an external unit to the lcd. table 2 electrical characteristics: parameter symbol values units notes min. typ. max. module: power supply input voltage power supply input current differential impedance power consumption rush current lamp operating voltage operating current established starting voltage at 25 at 0 operating frequency power consumption life time v cc i cc zm p c i rush v bl i bl f bl p bl 3.0 0.185 90 0.61 560 3.0 - 40 - 10,000 3.3 0.215 100 0.71 1.5 630 5.5 - 55 3.47 15,000 3.6 0.245 110 0.81 1.8 765 7.0 1050 1260 70 3.92 vdc a ohm watts a v rms ma v rms v rms khz watts hrs 1 2 1 3 4 5 6 7 notes: 1. the current draw and power consumption sp ecified is for 3.3 vdc at 25 and fv at 60hz.(at 64 gray pattern displaye d) 2. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 3. the duration of rush current is about 20ms . 4. the variance of the voltage is 10%. 5. the transformer output voltage in the inverter m ust be high considering to the loss of the ballast capacitor in the inverter. 6. the lamp power consumption shown above doe s not include loss of external inverter. 7. the life time is determined as the time at whic h brightness of lamp is 50% compare to that of init ial value at the typical lamp current www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 7 77 7/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 3-2. interface connections interface chip must be used flatlink ,part no. thc6 3lvdm63a(transmitter) , kz4e038c12cfp(receiver) made by thine microsystems,inc. this lcd employs two interface connections, a 20 pi n connector is used for the module electronics and two connectors is used for the integral backlight syste m. the electronics interface connector is a model df19 kr-20p-1h manufactured by hirose. the pin configuration for the connector is shown in the tab le below. table 3 module connector pin configuration (lvds) pin symbol description notes 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 vcc vcc gnd gnd a0m a0p gnd a1m a1p gnd a2m a2p gnd clkm clkp gnd nc nc gnd gnd power (3.3v) power (3.3v) ground ground difference signal difference signal ground difference signal difference signal ground difference signal difference signal ground difference signal difference signal ground no connection no connection ground ground 1. interface chips 1.1 lcd : kz4e038c12cfp (thc63lvdf64a core) 1.2 system : thc63lvdm63a 48tssop * pin to pin compatible with ti lvds 2. connector 2.1 lcd : df19kr-20p-1h(hirose) or gt100-20-ls-smt-r(lg cable) pin to pin compatible with hirose 2.2 mating -. wire type : df19g-20s-1c(hirose) -. fpc type : df19-20s-1f(hirose) 2.3 connector pin arrangement the backlight interface connector is a model bhsr-0 2vs-1, manufactured by jst. the mating connector part number is sm02b-bhss-1 or equivalent. the pin configuration for the connector is shown in the ta ble below. table 4 backlight connector pin configuration pin symbol description notes 1 2 hv lv lamp power input ground 1 2 notes: 1. the input power terminal is colored pin k. ground pin color is white. 2. the lamp ground should be common with g nd. no. 20 1 lcd rear view lcd connector www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 8 88 8/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. table 5 required signal assignment for flatlink pin # pin name require signals pin # pin name require signals 1 d4 r4 48 d3 r3 2 vcc vcc 47 d2 r2 3 d5 r5 46 gnd gnd 4 d6 g0 45 d1 r1 5 gnd gnd 44 d0 r0 6 d7 g1 43 nc nc 7 d8 g2 42 lvds gnd lvds gnd 8 vcc vcc 41 y0m a0m 9 d9 g3 40 y0p a0p 10 d10 g4 39 y1m a1m 11 gnd gnd 38 y1p a1p 12 d11 g5 37 lvds vcc lvds vcc 13 d12 b0 36 lvds gnd lvds gnd 14 nc nc 35 y2m a2m 15 d13 b1 34 y2p a2p 16 d14 b2 33 clkoutm clkm 17 gnd gnd 32 clkoutp clkp 18 d15 b3 31 lvds gnd lvds gnd 19 d16 b4 30 pllgnd pll gnd 20 d17 b5 29 pllvcc pll vcc 21 vcc vcc 28 pllgnd pll gnd 22 d18 hsync 27 shdn shdn 23 d19 vsync 26 clkin dclk 24 gnd gnd 25 d20 de(data enable) notes : refer to lvds transmitter data sheet for de tail descriptions. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 9 99 9/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 3-3. signal timing specification this is the signal timing required at the input of the lvds transmitter. all of the interface signal timing should be satisfied with the following specificatio ns for its proper operation. table 6 timing table item symbol min. typ. max. unit note dclk period t clk 15.4 15.4 15.4 65mhz hsync period t hp 1206 1344 1364 t clk width-active t wh 16 136 240 vsync period t vp 780 806 830 t hp frequency f v - 60 - hz width-active t wv 1 6 24 t hp de horizontal back porch t hbp 32 160 - t clk ( data horizontal front porch t hfp 10 24 - enable ) vertical back porch t vbp 2 29 - t hp vertical front porch t vfp 1 3 - www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 10 1010 10/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 3-4. signal timing wave forms dclk dclk dclk dclk hsync, vsync, de, data hsync, vsync, de, data hsync, vsync, de, data hsync, vsync, de, data t tt t clk clk clk clk 0.5v 0.5v 0.5v 0.5v cc cccc cc valid valid valid valid invalid invalid invalid invalid invalid invalid invalid invalid data data data data de(data enable) de(data enable) de(data enable) de(data enable) hsync hsync hsync hsync de(data enable) de(data enable) de(data enable) de(data enable) vsync vsync vsync vsync de dede de 0.7vcc 0.7vcc 0.7vcc 0.7vcc 0 00 0.3vcc .3vcc .3vcc .3vcc t tt t wh whwh wh t tt t hp hphp hp t tt t hfp hfp hfp hfp t tt t hbp hbp hbp hbp t tt t vp vpvp vp t tt t wv wvwv wv t tt t vbp vbp vbp vbp t tt t vfp vfp vfp vfp www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 11 1111 11/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 3-5. color input data reference the brightness of each primary color(red, green and blue) is based on the 6-bit gray scale data input for the color; the higher the binary input, the brighter th e color. the table below provides a reference for color versus data input. table 7 color data reference input color data color red msb lsb green msb lsb blue msb lsb r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic color s black red(63) green(63) blue(63) cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 red red(00) dark red(01) red(02) red(61) red(62) red(63) bright 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 gree n green(00)dark green(01) green(02) green(61) green(62) green(63)bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 blue blue(00) dark blue(01) blue(02) blue(61) blue(62) blue(63) bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 3-6. power sequence www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 12 1212 12/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. parameter values units min. typ. max. t 1 t 2 t 3 t 4 t 5 t 6 t 7 - 0.01 10 10 0.01 0.01 1 - - - - - - - 10 20 - - 20 20 - ms ms ms ms ms ms s notes: 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd v cc to 0v. 3. lamp power must be turn on after power supply fo r lcd and interface signal are valid. 3-7. vcc dip condition interface signal, v i (lvds signal of transmitter) power for lamp power supply for lcd v cc 90% 90%90% 90% 10% 10%10% 10% 10% 10%10% 10% 0v 0v0v 0v 90% 90%90% 90% t tt t 1 11 1 t tt t 2 22 2 t tt t 5 55 5 valid data valid data valid data valid data 0v 0v0v 0v off offoff off off offoff off lamp on lamp on lamp on lamp on t tt t 7 77 7 t tt t 6 66 6 t tt t 3 33 3 t tt t 4 44 4 vcc www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 13 1313 13/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. td 1)2.5v vcc 3.0v td 20 ? 2)vcc 2.5v vcc-dip conditions should also follow the power up/down conditions for supply voltage notes : this phenomenon is caused by row driver ic initialization after power on (1 vertical period) . 3.0v 2.5v www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 14 1414 14/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 4. optical specifications optical characteristics are determined after the un it has been on and stable for approximately 30 mi nutes in a dark environment at 25 . the values specified are at an approximate distan ce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . appendix a -1 presents additional information conce rning the measurement equipment and method.. table 8 optical characteristics parameter symbol values units notes min. typ. max. contrast ratio surface luminance, white luminance variation response time rise time decay time cie color coordinates red green blue white viewing angle x axis, right ( =0o) x axis, left( =180o) y axis, up( =90o) y axis, down ( =270o) gray scale cr l wh white tr tr r tr d x r y r x g y g x b y b x w y w x x y y 150 110 - - - 0.549 0.320 0.287 0.521 0.125 0.120 0.280 0.327 +40 -40 +10 -30 - 200 130 1.25 30 30 0.579 0.350 0.317 0.551 0.155 0.150 0.310 0.357 - - - - - - - 1.45 50 50 0.609 0.380 0.347 0.581 0.185 0.180 0.340 0.387 - - - - - cd/m 2 msec degree 1 2 3 4 5 6 notes 1. contrast ratio (cr) is defined mathemati cally as : surface luminance with all white pixels contrast ratio = surface luminance wi th all black pixels 2. surface luminance is the center point across the lcd surface 50cm from the surface with all pixels displaying white. for more information se e appendix a - 2. 3. the variation in surface luminance, white is determined by measuring l on at each test position 1 through 5, and then dividing the maxi mum l on of 5 points luminance by minimum l on of 5 points luminance. for more information see app endix a - 2. white maximum (l on1 , l on2 , ....l on5 ) minimum (l on1 , l on2 , ....l on5 ) 4. response time is the time required for the displ ay to transition from white to black (rise time, tr r ) and from black to white (decay time, tr d ). for additional information see appendix a - 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the v ertical or y axis with respect to the z axis which is normal to the lcd surface. for more informatio n see appendix a - 4 ( ta=25 , vcc=3.3v, f v =60hz, dclk=65mhz, i bl =5.5ma) www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 15 1515 15/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 6.gray scale specification. gray level luminance(%) (typ) l0 0.4 l7 1.5 l15 3.7 l23 8.7 l31 19.6 l39 37.5 l47 61.4 l55 86.8 l63 100 5. mechanical characteristics the chart below provides general mechanical charact eristics for the model LP133X7-A2 lcd. in addition , the figure below is a detailed mechanical drawing o f the lcd. note that dimension are given for refere nce purposes only. outside dimensions : horizontal 284 0.5 mm vertical 214.5 0.5 mm depth 5.5 0.3 mm bezel area : horizontal 274.2 0.5 mm vertical 206.6 0.5 mm active display area : horizontal 270.34 m m vertical 202.75 m m weight (approximate) : 480g (t yp), 500g(max) surface treatment : hard coating 3h. anti-glare treatment of the fr ont polarizer < front view > www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 16 1616 16/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. notes 1. unspecified tolerance 0.5mm < rear view > www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 17 1717 17/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 18 1818 18/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. notes 1. screw torque : 1.3-1.5kgf.cm www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 19 1919 19/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 6. reliability 6. reliability 6. reliability 6. reliability - environment test condition no. test item conditions 1 high temperature storage test ta = 60 240h 2 low temperature storage test ta = -20 240h 3 high temperature operation test ta = 50 50%rh 240h 4 low temperature operation test ta = 0 240h 5 vibration test (non-operating) sine wave, 10~500~10hz, 1.5g, 0.37oct/min, 3 axis, 1 hour/axis 6 shock test (non-operating) half sine wave, 180g, 2ms, one shock of each six faces (i.e. run 180g 2ms for all six faces.) 7 altitude operating storage/shipment 0 - 10,000 feet (3048m) 0 - 40,000 feet (12192m) {result evaluation criteria} there should be no change which might affect t he practical display function when the display qual ity test is conducted under normal operating condi tion. - on/off cycle : the display module will be capable of being o perated over 24,000 on/off cycles (lamp power & vcc on/off) - mean time between failure : the lcd panel and interface board assembly (e xcluding the ccfts) shell have a mean time between failures of 30,000 hours with a confidence lev el 90%. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 20 2020 20/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 7. international standards 7-1. safety a) ul 1950 third edition, underwriters laboratori es, inc. jan. 28, 1995. standard for safety of information technology e quipment including electrical business equipment. b) can/csa c22.2 no. 950-95 third edition, canadi an standards association, jan. 28, 1995. standard for safety of information technology e quipment including electrical business equipment. c) en 60950 : 1992 + a1 : 1993 + a2 : 1993 + a3 : 1995 + a4 : 1997 + a11 : 1997 iec 950 : 1991 + a1 : 1992 + a2 : 1993 + a3 : 1 995 + a4 : 1996 european committee for electrotechnical standar dization (cenelec) european standard for safety of information tec hnology equipment including electrical business equipment. 7-1. emc a) ansi c63.4 methods of measurement of radio-no ise emissions from low-voltage electrical and electronic equipment in the range of 9khz t o 40ghz. american national standards institute(ansi),1992. b) c.i.s.p.r limits and methods of measurement o f radio interference characteristics of information technology equipment. internationa l special committee on radio interference c) en 55022 limits and methods of measurement of radio interference characteristics of information technology equipment. european com mittee for electrotechnical standardization (cenelec),1988 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 21 2121 21/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 8. packing 8-1. designation of lot mark a) lot mark a, b, c : inch code d : year e : month f,g : panel factory h : module line i, j, k, l, m : serial no note 1. year(d) year 89 90 91 92 93 94 95 96 97 98 99 mark 9 0 1 2 3 4 5 6 7 8 9 2. month(e) month jan. feb. mar. apr. may jun. jun. aug. sep. oct. nov. dec. mark 1 2 3 4 5 6 7 8 9 0 n d 3. module line(h) line 1 2 3 4 5 6 7 8 9 10 11 12 13 mark 1 2 3 4 5 6 7 8 9 a b c d b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 10 pcs b) box size : 374mm x 329mm x 311mm k j i h g f e d c b a l m www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 22 2222 22/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 9.precautions please pay attention to the followings when you use this tft lcd module. 9.1 mounting precautions (1) you must mount a module using holes arranged in four corners. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface with a transparent pr otective plate in order to protect the polarizer lc cell. transparent protective plate should have suffici ent strength in order to resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polalizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil ead. and please do not rub with dust clot hes with chemical treatment. do not touch the surface df polarizer for bare h and or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials like chamois soaked with petrolium benzene. norm al-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers . do not use acetone, toluen and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9.2 operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v = 200mv (over and under shoot voltage). (2) response time depends on the temperature. (in l ower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time (require d time that brightness is stable after turned on ) becomes longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer or electrical contacted parts. and aft er fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) a module has high frequency circuit. if you ne ed to shield the electromagnetic noise, please do i n yours. when a back-light unit is operating, it s ounds. if you need to shield the noise, please do in yours. 9.3 electrostatic discharge control since a module is composed of electronic circuits. it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground thro ugh wrist band etc . and dont touch i/f pin direc tly. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 23 2323 23/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. 9.4 precautions for strong light exposure strong light exposure causes degradation of polariz er and color filter. 9.5 storage when storing modules as spares for a long time. the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the con tainer in which they were shipped. 9.6 handling precautions for protection film (1) when the protection film is peeled off, static electricity is generated between the film and polar izer. this should be peeled off slowly and carefully b y people who are electrically grounded and with wel l ion- blown equipment or in such a condition, etc .. (2) the protection film is attached to the polarize r with a small amount of glue. if some stress is ap plied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film wi thout rubbing it against the polarizer. (3) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the polarizer after the protection film is peeled off. (4) you can remove the glue easily. when the glue r emains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane . www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 24 2424 24/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. a-1 optical characteristic measurement equipment an d method a-2 luminance a-3 response time the response time is defined as the following f igure and shall be measured by switching the input signal for black and whi te. tr r tr d 100 90 10 0 % optical response white black white lcd module optical stage(x,y) field = 1 prichard 880 or equivalent 500mm 768 768768 768 512 512512 512 256 256256 256 192 192192 192 3 33 3 2 22 2 1 11 1 384 384384 384 5 55 5 4 44 4 576 576576 576 512 512512 512 384 384384 384 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x7 lp133x7 lp133x7 lp133x7- -- -a2 a2a2 a2 liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page ver 1.0 jun. 7, 1999 page 25 2525 25/24 /24/24 /24 lg lcd inc. lg lcd inc. lg lcd inc. lg lcd inc. a-4 viewing angle f = 90 (12:00) yu q = 0 z z' yd q f f = 180 (9:00) a f = 0 (3:00) xr f = 270 (6:00) tft lcd module xl www.datasheet.net/ datasheet pdf - http://www..co.kr/


▲Up To Search▲   

 
Price & Availability of LP133X7-A2

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X